Heating Pad System For Thermal Trekker Ski Boot Bag
Heating element for KULKEA's Thermal Trekker Heated Ski Boot Bag.
Product Specifications
-
Color: White
-
Application: Heating elements are designed and have received safety certifications for use only in KULKEA's Thermal Trekker Heated Ski Boot Bag. Heating elements are not designed or approved for any other use, including, but not limited to, in any other bag. Any unintended use or misuse may result in damage or harm to person or property.
Heating Element Overview
-
Dual-connected Heating Pads: Each system includes 2 pads (one for each boot pocket).
-
3 Heat Setting Controller: Low, Medium and High temperature settings with max pad temperature of 140F.
-
Dual Plugs: 120V wall plug and 12V (7.5A) automobile plug
Note, please check your original Thermal Trekker purchase date and sales receipt to see if heating element is still under warranty.
Thermal Trekker Use & Care Instructions
Use and Care +
Use and Care Instructions
- Check that the heated pads, sleeves and cords are properly attached to the bag.
- Remove snow and moisture from the outer shell of ski boots and place one boot in each side boot pocket with toes pointing toward the front of the bag.
- Zip boot pockets closed; boot pockets may remain slightly unzipped for ventilation.
- Remove any items that may be sensitive to heat, such as goggles, helmet or leather.
- To warm boots insert AC plug into 120V wall outlet and select designed setting.
- To keep ski boots warm during transit insert DC plug into 12V automobile outlet.
- The heating system is for use only within the Kulkea designated and approved bag and for purposes of warming alpine ski boots and apparel.
- To clean, unplug the bag and allow it to completely cool before hand spot cleaning.
- If wet, allow the bag to ventilate; never put in an electric dryer or use a hand dryer.
- Store the bag in a cool dark and dry place when not in use.
Note: For boots, gear or apparel that may be temperature sensitive, consult the item manufacturer before warming.
Caution: The pack is used for carrying heavy alpine ski gear. Skiing, ski gear and winter conditions are inherently dangerous, and caution must be taken at all times when using this product. Never use this product improperly, too close to property or other people. This pack is designed for use by adults.
Technical Instructions
AC Plug / 3 Heat Setting Controller
The AC plug has a 3 Heat Settling Controller for warming boots. The settings adjust the wattage and time to generate 140F/60C of heat. The AC plug is connected by an 80" / 203cm cord and is for use indoors only.
Controller Setting Guidance:
-
H (160W) – For use between 1-3 hours.
-
M (120W) – For use between 3-6 hours.
-
L (80W) – For use between 6-8 hours.
Note: The guidance above is subject to surrounding room temperatures and the temperature at which boots are before heating. Do not heat for longer than 8 hours.
DC Plug
The DC plug is for keeping pre-warmed boots warm during automobile transit. Upon arrival at the ski destination, turn-off the automobile and unplug the bag. The 12V DC plug is 90W (Draws 7.5 Amps) and connected by a 65" / 165cm cord and for use within automobiles only. Note: The L, M & H controller settings on the AC plug have no correlation to the DC plug as the DC plug operates independently on an L setting only.
WARNING: Use of the DC plug while the motor is not running may deplete the automobile's battery. To reduce the risk of carbon monoxide poisoning do not use the DC plug while the automobile is stationary.
